Your home should be your refuge, but often there are hidden dangers that you do not know about. Find out how examining mold can benefit you, even if the problems are invisible to the naked eye.

Problems with humidity

You may have humidity in your home that you do not know about, and examining the mold can reveal these problems. Common areas where spores can develop include your basement, crawls, bathroom, attic and under the sinks. A dripping pipe can lead to dangerous humidity, which leads to polluted air and damaged the wood. A professional survey can identify these areas so that you can restore them before they deteriorate.

Consideration of the problem

You can not conduct a thorough research of mold or independently rid your house of fungus. Bleach, detergents, and painting on this issue will not make him leave. There are several types of mold, each of which reacts differently to treatment. If you already know that you have this fungus growing in the room, ask the expert to determine what type it is, so that they can treat it to you and fix the problem. Professionals use special chemicals and tools to safely rid your home of such problems and help prevent its recurrence.

Keeping mushrooms from returning

Myrtle Beach mold inspectionMoisture is the biggest enemy in your home when it comes to storing mushrooms. An expert in mold inspection can help identify what causes humidity in your home, whether it is bad ventilation, a tap leak or even an existing wood rot that allows a spore in the air to flourish. Without eradicating the water problem, you can not hold this mushroom in fear. You may find that you also need to hire a professional plumber to help solve this problem.

The best way to protect your home from mushrooms and potentially dangerous spores are to inspect the mold on your site. Once the fungus is found, the expert can tell you what your problem is, eliminate the current mushrooms, and then help you make your home less livable so that it grows up again. Even if you think that your residence is safe, the chances that you have some fungus growing on your walls somewhere, and ignore the problem will not make it go away.

Given the health risks associated with the treatment of mold, it is best to contact specialists for accurate diagnosis and remedying the problem. An image can have detrimental effects on your property value, as well as for your health. Do not hesitate to handle the problem before it gets worse.

What makes a good mold inspection?

Careful form control and form control are key to preparing an effective mold removal plan. There are several methods and pieces of equipment that help the inspector in the search for mold. Today, I will clarify some of these methods and introduce widely used monitoring tools.

To investigate mold, it is necessary to investigate the moisture, so a precise determination of the location of water penetration or excessive humidity is the main priority of form control. A hygrometer is a device used to measure the humidity of the air in the environment or humidity. The hygrometer can be used to determine if the attic supports, for example, a sufficient amount of moisture in the air to stimulate the growth of mold. This information is useful for solving the source of mold growth in this attic housing, increasing airflow and ventilation. A moisture meter measures the percentage of water in a given substance, for example, gypsum board or structural timber. This may indicate the presence of moisture behind the wall of the inspector, without harming anything.

In addition to testing for moisture, mold testing is obviously carried out. The two most commonly used types of molds are injection molding tests and testing air samples. The tape casting method uses a transparent adhesive film that can collect particle particles from the surface with suspicious staining or growth. The results of these tests can classify the genus and the amount of the form in question. Air testing is probably the most useful type of mold test and is usually a form of testing used to “clean” the area after the mold removal project. Air test measures the content of particle particles in the air, invisible to the naked eye. Also, it is the air form, which is most harmful to the human respiratory system. This type of test can also be used to identify cross-contamination from the core and the clean zone.

When mold grows in a wall emptiness, but not on the surface of a wall, it is difficult to find and identify. In this situation, a borescope is useful. The borescope has a camera at the end of a long flexible area that is fed to a small screen on the device that can display a live image of the wall emptiness. This device can also take pictures and record video.

The combination of all these methods provides a good form check, and a good inspection makes a good mold removal plan.

 

Ocean Breezes Home Inspections LogoOcean Breezes Home Inspections has been providing Home Inspection, Mold Inspections, Air Quality Inspections, Pre-listing inspection, Foreclosure Inspection, Builder 1-year Warranty Inspection, Home Insurance Inspections, Structural Inspections, Roof Inspections, Condo Inspections, Investor Property inspections, Multi-unit Inspections to home buyers and home sellers in the following areas of Myrtle Beach, Murrells Inlet, Garden City Beach, Surfside Beach, Pawley’s Island, Conway, North Myrtle Beach, Little River, Georgetown, Andrews and the surrounding areas.

When you or someone you know needs the services of a quality home inspection company, we would truly appreciate you thinking of us. You can schedule right from our website or call our office (410) 346-5333. Thank You.